New Jib Sheets


About 50 nm from Bundaberg my starboard jib sheet decided it was tired and split in half. I was able to tie the ends together and make it into port. Of course, it is possible to sail with one jib sheet. You just furl, put the sheet on the appropriate side and unfurl. Not necessary in this case. Swapping sheets is also a good way to move the sheet blocks from the inside to the outside of the rail for going downwind.I replaced the sheets. Unfortunately the previous sheets were “yacht braid.” It has a very soft “hand” so it is easy to trim without gloves. Not so the new sheets.In the year (I left Norfolk, VA on 11 November 2015) that I have been sailing to and in the Pacific I have been on port tack about 90% of the time due to the easterly trades. In retrospect it was not a surprise that it was the starboard sheet that failed. Prudence required replacing both.Fair winds and following seas šŸ™‚
http://feedproxy.google.com/~r/SailboatRacing-Rebootusa60493/~3/ybtzQQNcMJY/new-jib-sheets.html

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s