In line fuses

I have been having trouble with my cockpit multifunction display. Sometimes it works (when I don t need it.) Sometimes it doesn t (when I am coming into port.) I finally tracked the problem down to erratic supply voltage. The culprit? The in line “marine grade” fuse holder. I learned two lessons:1. “Marine Grade” corrodes like everything else. Maybe slower.2. Never install a fuse behind six anti-theft screws that requires a special tool stored at the bottom of everything to remove.Fair winds and following seas :)Debut, Indonesia 24 July 2017
http://feedproxy.google.com/~r/SailboatRacing-Rebootusa60493/~3/3ka7vcXxz38/in-line-fuses.html

Via Inmarsat:

Last night we had a spot of trouble. As the wind picked up we started to further furl the jib when the sheet jammed fron an override on the drum. We rigged a backup sheet. We were able to clear the drum and restore normal operation. Please note your reply is limited to 160 Latin characters or approximately 135 for non-Latin characters. Sent via Inmarsat. The mobile satellite company
http://feedproxy.google.com/~r/SailboatRacing-Rebootusa60493/~3/NfIPfuHwXDY/via-inmarsat_3.html